Central Sterile-Medical Device Reprocessing

Do you Need an Ultra pure Water System for your central sterile or medical device processing department?
Absolute water technologies can help you!
Call us AT 866.986.6860.

Keeping the water in your medical instrument sterilizer and reprocessing equipment contaminant-free is incredibly important in order to adhere to safety best practices. A properly-designed water treatment system for your medical sterilizer equipment is essential to ensure patient safety. Absolute Water Technologies can provide you with critical rinse and utility water that meets best practices for Medical Device Reprocessing. We use compliantly designed and top-of-the-line water treatment equipment and service procedures to make sure that your medical device reprocessing center is provided a source of reliable and worry-free water free of contaminants. 

Receive Service from Experienced Professionals

We are a trained 510k-FDA water treatment supplier, and are well-versed in the techniques and technologies needed to purify water for medical-grade sterilization, as defined by AAMI (Association of Advancement of Medical Instrumentation) Standard ST108. We have successfully handled the installation of many water quality regulation systems for medical sterilizer machines. As such, when you choose us for your medical water treatment solutions, you can feel confident that we’ll provide you with reliable service. In the past, we have helped countless facilities meet best practices and ensure that they are compliant with all water safety standards.

Talk to an Expert Today

With our extensive experience, you can feel confident in the service we provide. If you need a high-quality water treatment system for your medical instrument sterilizer, then please consider giving us a call. We offer emergency service to those who need it.

ST108:2023 – Water for the Processing of Medical Devices

ANSI/AAMI ST108 was published in August 2023 and provides updated water quality requirements for sterile processing. Absolute Water Technologies is very familiar with the new Standard and how to ensure compliance. Not only did our President help write a large portion of the Standard, but as a member of AAMI TIR 119- Guidance on Healthcare Implementation and Use of ANSI/AAMI ST108, he was also asked to lead the committee on Installation Qualification (IQ) and Operational Qualification (OQ).

We have successfully consulted numerous locations on best practices for Medical Device Reprocessing over several years and are equipped and ready to help you comply with the new Standard and meet its requirements.

We offer consulting services and can provide a thorough site review and risk assessment, performed by our owner or a qualified Service Technician, which includes:

 A step-by-step mock survey of the system, including point by point to access to see if you are meeting required and recommended best practices at each step.
 A full, written report, with a tiered approach to corrections is offered, which also includes a rough system drawing and quote for needed service/equipment.
 We advise on proper and required testing, required monitoring, and ongoing system evaluation and maintenance programs.
 An analysis of feed water for pH, conductivity, hardness, etc. (Other testing available, billed separately)
 We can also offer a brief training session with key individuals on site to educate them on the standard.

Please note that we can perform system-wide training to get your staff up to speed on what the standard really means and help them navigate requirements versus recommended best practices.

As you may have gathered, the area of Medical Device Reprocessing is nothing new to us. You will be in the hands of a local rep that has substantial experience. Absolute Water technicians have detailed knowledge on this topic, and expertise on how to design and maintain a system to achieve desired results. Additionally, we also partner with companies who handle Water Management Plans and complement, not compete, with the services they provide.

We do not push new equipment! Our goal is to provide the most cost-effective solution to meet the requirements. When possible, we can work to retrofit existing systems to make them compliant.

We are a one stop shop with expertise in system evaluation, remediation of sick systems, designing compliant systems, quoting and installing the correct equipment, providing baseline testing and performing preventative maintenance including disinfection services.

We are here to support you with understanding and navigating the 88-page ST108 (as well as ST-91) and the potential implementation of ST108 compliant SPD water treatment upgrades.

Craig G.
Craig G.
Read More
Rick, Eric, and the entire team at Absolute Water Technologies are consummate professionals in water treatment. They have installed two (2) RO/DI systems for our businesses in Missouri and Wisconsin. Both projects were completed on time and in budget and final purity specifications were met easily on both systems right at startup. Service after the sale has been top notch, and both systems are performing perfectly 18 months after installation. When the time comes for us to expand/upgrade either of our systems, I would not hesitate to work with them again.
Jacob B.
Jacob B.
Read More
These guys are top notch! They are very experienced, they offer reasonable pricing, and are some of the most knowledgeable high purity water treatment team in the business.
Tom W.
Tom W.
Read More
Rick and crew have gone above and beyond again and again to help us with our DI water needs. Rick even came on a holiday weekend to get us back up and running. Highly recommended.